Clamp Body TP

Thread spacing from neck of 1mm not applied, gap <0.4mm which is outside of the acceptable tolerance of +-0.1mm.



May 03,2020
595 viewsReport item
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Brass parts customised 2000, good quality, more difficult to process, turning and milling composite do, or eccentric holes, bore finish requirements of 0.8, do very well
    Full of details, accurate to 0.1 mm level, the total length of 60 cm no deformation, no shrinkage, no odor, customer service patience analysis to solve drawing problems. The quality of the parts has ...
    I am happy with the quality of the parts received. The shape of my parts was very complex and I had doubts that they would be properly machined. I am happy to see that my parts are as they suppose to ...
    I have use justway a few times now with great results. I even had a quality-related item and they went above and beyond to fix it for me. Great company to work with.
    Ciertamente, estoy muy impresionado con la calidad de impresión; el detalle fino es excepcional. Un servicio al cliente sobresaliente antes y después de enviar mi pedido. Puedo dar a Justway la recome...
    I tested it out, and it meets the requirements here. During the manufacturing process, there was an issue with the tolerances I specified, but the manufacturer promptly pointed it out and made the nec...
    It was easy for me to manufacture my prototype at a very competitive price. The online ordering system from justw offers easy tools to upload manufacturing designs and provides a broad choice of mate...
    The processing precision is very good, and the process of making sure there is no error in the production is meticulous, so it was very impressive it is. I will order again next time.
    SHOW ME MORE