My first attempt at any 3D printing, and using PCBWAY - amazing it all fitted, PCBWAY quality was excellent and good value. Delivered quickly to the UK, ordering process was simple too.
All features are within 0.4mm of spec. Arrived slightly wrapped. Due to a design error, the well in the center is too shallow for the 100mm Petri dish to sit in.
Part looked great.
This part was a prototype of a small link to hold bushings that was designed for lightweight aluminum. Machining the part would be inexpensive, but I used the AlSi10Mg printing service from PCBWay to...
Wonderful crisp print amazing for the cost
Nice print, support material removed and cleaned up very well. Great surface finish.
Amazing print quality, my mind is blown at how clear it is.
very satisfied, thanks for the work! I will repeat other orders
Great print, support structure removed and bead blasted uniformly.
A small part to test the viability of SLM printing working parts in aluminum with post machining similar to casting. Print was exceptional quality and within tolerance. Part was solid without any poro...
2 copies, one fits perfectly on the camera, the other is a bit too small. Some heat solve the issue and now fits perfectly.
Using pcb way's 3d printer service to make the fan shroud parts of prusa mk3s+, the precision is quite good, so that the replacement process is quite smooth, and I will never encounter the situation o...
The outer diameter is 0.4mm too wide. The inner diameter is 0.3mm too narrow. This results too tight a fit on the microscope objective lens. In the next revision I have to take those discrepancy into ...
The thumbring turned out perfect. It polished up to a mirror finish.
Came out really nice, you can't tell that they were 3d printed.
This part of my project and it was my first time order from this website, quality and aquracy of 3d printing was closed to 100%. I'm very satisfied with it.
1 2 3 4 5 6 7 8 9 10 11 ...